Focus On Floor Tile Machine With 21 Year

How Should We Maintain Concrete Tile Machine?

Why Should We Maintain Concrete Tile Machine

As we all know, after using for long time, almost every machine will appear all sorts of problems. And the concrete tile machine is also not exceptional. So how should we maintain this equipment when operation?

 

4 Steps To Maintain Concrete Tile Machine

1. Before the start of terrazzo tile machine, check the hydraulic system to make sure whether its oil level is normal or not. Ensure that proximity switch and limit device is fastened, manual and automatic circulation is normal and electromagnetic valve is in the original position. Open cooling water before starting discharging water after shutdown.

2. In the daily operation, before starting the interlocking tiles machine guide rail on the surface. The inner surface of the guide pin is on the sliding surface, and the mould and sliding surface surrounding the lining board. The movement of ejection device combining surface is filled with lubricating oil. if found to have loose phenomenon, for example, the movement parts join have any loose, to tighten them.

3.In the process of cement tiles machine operation, keep observing the running status of each system and the quality situation of moulding tile. If any unusual phenomenon has appeared, should immediately stop. After being ruled out abnormal, boot up the machine again.

4. If it is found that the filter cloth of the floor tiles making machine is blocked or damaged, it must be timely flushed or replaced to ensure the quality of moulding tile.

 

Get A Free No Obiligation Quote Now!




We guarantee 100% privacy, your information will not be shared.

Tel:0086-0371-53762053

Tel:0086-13674998188

Whatsapp:0086 13674998188

Skype:yuxi.zhengzhou

Wechat:8613674998188

Copyright 2012. All Right Reserved by Concrete Block Making Machine